Blu 30A ESC - Brushless Motor Driver
This motor drive is specially configured for underwater motors, bi-directional and compatible with Blheli and Blheli_S configuration systems. It supports Dshot150, Dshot300 and Dshot600 protocols and can operate in a wide voltage range between 8v-24v (2s-6s on battery). It has a maximum current capacity of 30 amps and instantaneous current capacity of 35 amps, with protection in case of overheating. It has dimensions of 36x20x5mm and weighs 13 grams with cables. With PWM control, it supports full forward motion up to 2000 microseconds, stop at 1500 microseconds and full reverse at 1000 microseconds, while the stop accuracy is in the range of +-1 microsecond.
Product Features
| Feature | Description |
|---|---|
| Configuration | Configured for underwater engines, bidirectional. |
| Configuration System | Compatible with Blheli and Blheli_S Configuration System. |
| Protocols | Supports Dshot150, Dshot300 and Dshot600 protocols. |
| Voltage Range | 8v to 24v (compatible with 2s to 6s batteries). |
| Overheat Protection | Overheat protection feature available. |
| Maximum Current | 30 Amps maximum continuous current capacity. |
| Instantaneous Current | 35 Amps instantaneous current capacity. |
| Dimensions | 36mm length, 20mm width and 5mm height. |
| Weight | 13 grams total with cables. |
| PWM - Full Forward | PWM signal for 2000 Microseconds full forward. |
| PWM - Stop | PWM signal for 1500 Microseconds stop. |
| PWM - Full Reverse | PWM signal for 1000 Microseconds full reverse. |
| PWM Stop Sensitivity | PWM sensitivity in stop position +-1 Microsecond. |
You can reach us through the forum for questions and suggestions
📄️ Use of the product
Using the Blue 30A ESC