Skip to main content

VESC 6.9 100A(Max 200A) High Power Motor Driver- Flipsky

Vesc Motor Driver

VESC is an open source motor drive that can operate in a voltage range from 14V to 60V and can provide 100A continuous and up to 200A instantaneous current. With a variety of control modes, it supports DC, BLDC and FOC (sinusoidal) modes and offers energy recovery with regenerative braking. VESC has USB, CAN and UART ports, is compatible with sensors such as ABI, HALL, AS5047 and is programmable. Measuring 75.4×63.7×31.1mm, this driver is equipped with various protection functions such as low and high voltage protection, overcurrent and high temperature protection and supports accelerometer modules, offering a wide range of applications for your electric vehicle projects.

Product Features​

FeatureValue
Continuous current100A
Instantaneous current200A
Voltage14V-60V (Cells: 4-13S; safe for 4S to 12S, voltage - spikes must not exceed 60V!)
BEC5V @ 1A ERPM: 150000 Control
Interface PortsUSB, CAN, UART
Supported SensorsABI, HALL, AS5047, AS5048A
Input Set SupportPPM, ADC, NRF, UART, SPI, IIC Modes: DC, BLDC, FOC - (sinusoidal)
Regenerative capacityYes
ProgrammableYes
Motor cable10AWG
Power cable8AWG
Size75.4×63.7×31.1mm (including heat sink)
FeaturesFour Control Modes: Current / Duty Cycle / Speed / Position - control mode.
Protection functions: undervoltage protection, overvoltage protection, over-current protection, over-temperature protection, over-temperature protection of MOSFETs. Supports accelerometer measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
info

It is recommended to use the factory firmware version 5.2, new firmware update may damage the ESC.

Comprehensive Driver Tuning Software VESC Tool​

You can easily program your motor driver with VESC interface. You can use this link to download the programmer.

To buy this product click here.

You can reach us through the forum for questions and suggestions